Hikmicro Thunder 2.0 Thermal Rifle Scope TE 19 2.0

Hikmicro Thunder 2.0 Thermal Rifle Scope TE 19

This HikMicro Thunder 2.0 TE19 thermal imaging scope has a standard magnification of 2.47x and it has a range of 1000 meters. This makes it possible to spot your target from afar. Once the target is within range, you can manually activate the camera to capture the shot or let the thermal imaging scope do it for you. In fact, it has a recoil-activated recording function, where the camera takes a short shot as soon as it detects recoil. This ultimately gives you short clips of every moment you pulled the trigger. If two shots are fired in quick succession, those two clips will be merged. This makes efficient use of the battery and storage space that the HikMicro Thunder 2.0 TE19 thermal imaging scope has.

There is a rechargeable Li-ion battery in the thermal imaging scope, allowing it to stay on for as much as ten consecutive hours. The battery can be easily removed or changed through the flap on the left side of the scope. The HikMicro Thunder 2.0 TE19 thermal imaging scope has an eMMC (an embedded multimedia card) with a storage capacity of 16 GB. Thanks to the free HikMicro Sight app, you get all the photos and videos you take transmitted to your smartphone through the hotspot function. It is also possible to adjust the settings of your thermal imaging scope through the Sight app.

By intelligently linking the functions, the buttons on top of this HikMicro thermal rifle scope are used to their full potential. Virtually every button can be pressed once or held down, and both methods of pressing are linked to a different function. There are a total of five buttons, with the following functions:
• On/Off button: Pressing the button once puts the thermal imaging scope into standby mode or activates it. Holding the button down turns it on or off.
• Mode button: Press the button to switch between the four different color modes (white hot, black hot, red hot, fusion).
• Capture/Record button: Pressing the button once takes a photo. Holding down the button starts or stops a video recording—with audio. When you’re in the menu, you can use this button to move the cursor up.
• Menu button: Pressing the button once takes you to the quick menu. Holding down the button takes you to the expanded main menu. When you’re in the menu, pressing this button once confirms your selection. Holding down the button—while in the menu—closes the menu.
• Digital zoom button: Press once to switch between the different digital zoom levels (1x, 2x, 4x, 8x). Press and hold to activate Picture-in-Picture mode. When you’re in the menu, you can use this button to move the cursor down.

The HikMicro Thunder 2.0 TE19 thermal imaging scope features a 256x192 thermal sensor with a pixel pitch of 12 µm. With a frame rate of 50 Hz, you are assured a nice smooth image displayed on a 1024x768 (0.39-inch) OLED display. The NETD (the thermal sensitivity of the thermal imaging scope) is 35 mK, allowing the thermal imaging scope to detect and display even the smallest temperature differences. The eyepiece of this rifle scope has an eye relief of 45 mm and the diopter can be adjusted from -5 to +5. Other functions include measuring distance and adjusting the color of the reticle. Depending on the color mode selected, the reticle will change color to remain clearly visible.

This thermal imaging rifle scope has an IP67 waterproof rating. This means that the rifle scope can be submerged to a depth of one meter for up to 30 minutes. Furthermore, the housing ensures that the riflescope is recoil resistant.

Manual Hikmicro Thunder 2.0 Scope:

https://www.huntingandoutdoor.eu/Files/3/7000/7634/FileBrowser/hikmicro-handleidingen/thunder-2.0-scope_um_v5.5.61_nl-nl_20230808.pdf