Heck-Pack Lighting Kit with Large Lights and Aluminum Protective Cover – 7- or 13-pin

A loaded game carrier must not obstruct the view of your vehicle’s taillights without providing the required lighting. The Heck-Pack lighting kit with aluminum protective cover therefore combines a complete, ECE-approved lighting unit with robust protection made of thick-walled aluminum chequer plate.

The unit comes fully ready to connect and is available with a 7-pin or 13-pin plug. Turn signals, brake lights, taillights, rear fog lights, and license plate lights are integrated into a single, robust system specifically designed for use with Heck-Pack game racks and rear racks.

Not just a makeshift light bar, but a robust “Made in Germany” solution for hunters and outdoor enthusiasts who want to equip their Heck-Pack properly and professionally, even on public roads.

Complete lighting system for your Heck-Pack game carrier

A game carrier mounted on the tow hook can, depending on the vehicle, its dimensions, and the load, completely or partially obscure the car’s original taillights. When the vehicle’s lights are covered, additional lighting is required.

The Heck-Pack lighting unit was developed specifically for this purpose and provides a complete taillight solution for the carrier.

The set includes:

• Turn Signals
• Brake Lights
• Rear Lights
• Rear Fog Light
• License Plate Lights
• Integrated reflector on the 13-pin version
• 7- or 13-pin connector
• Complete wiring
• Mounting material
• Lighting Equipment
• Aluminum protective housing

This eliminates the need to assemble a separate system from various universal parts.

ECE-approved lighting for use on public roads

Vehicle lighting isn’t just about visibility. The lighting used must also meet the applicable technical requirements.

The lights in this Heck-Pack set are type-approved and bear an official ECE certification mark for use on European roads.

This is especially important when a Heck-Pack rear rack is regularly used to transport game, hunting gear, or other cargo. If the vehicle’s original lights are obscured by the rack or cargo, the required lighting must be clearly visible.

With this original Heck-Pack lighting unit, you’re choosing a system that was developed from the ground up for this application.

Aluminum protection for demanding use

The spot where a lighting unit is mounted on a rear rack is also a spot where high-quality materials are essential.

After all, when hunting, you don’t just drive on smooth asphalt. Forest trails, unpaved access roads, mud, vegetation, and loading and unloading equipment place different demands on a lighting system than normal daily driving.

That is why the lights are protected by a structure made of strong, thick-walled aluminum checker plate.

Precisely folded and laser-cut

The aluminum parts aren’t simply placed around the light. The sheet metal is precisely folded and features finely laser-cut cutouts and pre-drilled mounting holes.

This results in a neat, solid construction that perfectly complements the rugged character of a Heck-Pack game carrier.

The perforated texture also enhances the professional look of the entire unit.

High-quality edge protection

The edges of the aluminum protective frame are finished with high-quality piping/edge protection trim.

This finish protects the edges while also providing a neat, polished look. It is precisely these details that distinguish a simple, universal light bar from a system designed as a durable addition to a high-quality rear rack.

Available with a 7- or 13-pin connector

The Heck-Pack lighting kit is available with a 7-pin or 13-pin connector. This allows the kit to be tailored to the vehicle's electrical connection.

7-pin connector

The 7-pin version provides the necessary connection options for the integrated lighting and is suitable for vehicles equipped with a corresponding 7-pin connector.

13-pin connector

For vehicles with a modern 13-pin tow hitch connector, the set is also available with a 13-pin plug. This version also features a reflector integrated into the lighting unit.

Before ordering, check which type of connection your vehicle has and then select the appropriate model.

Delivered fully ready to connect

When it comes to accessories for a game carrier, ease of use is just as important as build quality. No one wants to be rummaging through loose wires, lights, and mounting parts right before a hunting trip.

That is why the Heck-Pack lighting unit comes fully wired and ready to connect, including mounting hardware and lights.

The electrical components thus form a single, complete system. Once properly installed, all that remains is to connect the designated plug to the vehicle’s power source.

With the simultaneous purchase of a Heck-Pack rear rack

If this lighting kit is ordered at the same time as a Heck-Pack rear rack, the unit will be delivered fully mounted on the rack.

This means that the set is delivered as a complete system and is ready for use immediately after being connected to the vehicle.

For anyone putting together a new Heck-Pack game carrier, this is the most practical solution: the carrier and lighting are assembled directly as a single functional unit.

Handy for hunting and transporting game

Suppose: After an evening hunt, a wild boar that has been shot needs to be transported on the Heck-Pack game carrier. Due to the dimensions of the carrier and the game, the vehicle’s taillights are no longer sufficiently visible.

With the Heck-Pack lighting kit installed, the essential lighting functions remain clearly accessible behind the carrier. At the same time, the aluminum protective structure helps protect the lighting components while loading and driving on unpaved roads.

Even when the rear rack is used for hunting gear, tools, or other bulky cargo, a dedicated lighting unit provides a professional solution as soon as the vehicle's lights are covered.

Why choose the original Heck-Pack lighting kit?

At first glance, a universal, inexpensive light bar may seem like a simple solution. With regular use, however, build quality, protection, mounting, and finish become increasingly important.

The Heck-Pack model stands out thanks to its combination of ECE-type-approved lighting, plug-and-play wiring, and a specially manufactured aluminum protective housing.

This set is therefore not only designed to add lighting to the carrier, but also to provide a durable solution that matches Heck-Pack’s high standards of quality.

Made in Germany

The Heck-Pack lighting kit is manufactured in Germany. The choice of materials, precision-folded aluminum parts, laser-cut cutouts, and complete electrical preparation underscore the focus on durability and functional quality.

This is important for hunters who use their equipment intensively. A game carrier takes a lot of wear and tear during a hunting season, and the mounted lighting must be designed to withstand that.

Technical Specifications

• Original Heck-Pack Lighting Set
• For Heck-Pack game carriers and rear racks
• Available with a 7-pin or 13-pin plug
• Turn Signals
• Brake Lights
• Rear Lights
• Rear Fog Light
• License Plate Lights
• Integrated reflector on the 13-pin version
• Fully wired and ready to connect
• Includes lighting equipment
• Includes mounting hardware
• Sturdy aluminum protective structure
• Made of thick-walled aluminum checker plate
• Precision-bent aluminum parts
• Precisely laser-cut cutouts
• Pre-drilled mounting holes
• High-quality edge protection with piping
• Lighting with official type approval
• Certified with the ECE mark for use on European roads
• Sturdy design for heavy-duty use
• Made in Germany
• When purchased together with a Heck-Pack rear rack, it is delivered fully assembled

Scope of delivery

The package includes:

Original Heck-Pack lighting unit + aluminum protective cover + mounting hardware.

If ordered together with a Heck-Pack rear rack, the lighting kit will be delivered pre-installed.

The professional lighting solution for your Heck-Pack

Anyone who invests in a high-quality Heck-Pack game carrier doesn’t want to compromise its functionality with a fragile, universal light bar. Especially when the carrier is regularly used for hunting, transporting game, and driving on unpaved terrain, the lighting and protection must be of the same high standard as the carrier itself.

The Heck-Pack lighting kit with aluminum protective cover therefore combines a complete vehicle lighting system with a sturdy aluminum construction, ECE type approval, and a plug-and-play 7- or 13-pin connector.

A well-designed addition to the Heck-Pack rear rack when safety, durability, and a professional finish are top priorities.